What is a diamond sieve, and how does it sort stones?
A diamond sieve is a set of metal plates, each drilled with round holes of one fixed diameter. The plates are stacked with the largest holes at the top and the smallest at the bottom. A parcel of rough-sorted melee is poured in at the top and shaken.
Each stone falls through every plate whose holes are wider than its girdle. It stops on the first plate whose holes are narrower. When the shaking is done, every plate holds stones whose diameters fall between its own aperture and the aperture of the plate above. That band is one sieve size.
The trade sorts small diamonds this way because measuring them one by one is not practical. A parcel of small melee can hold thousands of stones. A sieve sorts them quickly, and every stone on one plate falls in the same narrow size band.
Sieve charts are built for round stones, because a round stone has one diameter. For fancy shapes, state the length and width in millimetres instead.
How does +/− sieve notation work?
A sieve size is written as two plate numbers, one with a plus and one with a minus.
- The plus number is the plate the stones were retained on. They did not fall through it, so they are larger than its holes.
- The minus number is the plate the stones passed through. They are smaller than its holes.
So a stone sold as “+A −B” is larger than aperture A and smaller than aperture B. Its girdle diameter lies between the two.
A range can span several plates. A parcel described as “+A −D” holds everything retained on plate A that passed through plate D, so it mixes the sizes of every plate in between. That is a wider spread than a single band. Know which one you are buying.
Why do two suppliers give the same stone different sieve codes?
Because there is no single standard. The codes are names for plates, and different suppliers and regions name their plates differently. Three numbering systems are in common use:
- plus/minus plate numbers running from +000/−0 up to +13/−13.5;
- sieve numbers in pairs, from Sieve 8/9 up to 36/38;
- single plate numbers from 0 to 11.
The same physical stone can be labelled differently in each system. American and European sieve preferences also differ slightly. And a plate number is only a name: what actually sorts the stone is the hole diameter. Nothing guarantees that plate “7” in one office has exactly the same hole as plate “7” in another.
This is why first orders between a new buyer and a new supplier are where sieve disputes happen. The buyer orders a code from their own chart. The supplier fills it from theirs. Both are right by their own plates, and the goods still do not fit the setting.
Experienced buyers avoid this by stating the millimetre interval directly.
| Sieve code | Millimetre interval | |
|---|---|---|
| What it describes | The name of a plate or pair of plates | The girdle diameter itself |
| Standardised? | No. It depends on the supplier’s numbering | Yes. 1.30 mm is 1.30 mm everywhere |
| Fast to say in the trade | Yes | Slightly longer to write |
| Risk of dispute on a first order | High, if the two charts differ | Low |
| Best use in an order | As a reference, next to the mm | As the specification |
How do millimetres convert to carat weight?
For round brilliant melee, diameter and weight follow each other closely. These figures are consistent across trade sources:
| Diameter (mm) | Weight per stone (ct) | Stones per carat (approx.) |
|---|---|---|
| 1.00–1.10 | 0.005–0.006 | 180 |
| 1.20–1.30 | 0.008–0.010 | 110 |
| 1.30–1.40 | 0.010–0.012 | 90 |
| 1.50–1.60 | 0.015–0.018 | 62 |
| 1.90–2.00 | 0.029–0.033 | 32 |
| 2.40–2.60 | 0.052–0.065 | 17 |
| 2.80–3.00 | 0.080–0.100 | 11 |
Four things to keep in mind when you read it:
- The weights are approximate. Weight at a given diameter depends on the stone’s proportions. A deeper stone weighs more than a shallow one of the same diameter.
- Stones per carat is the weight turned upside down. One carat divided by the weight per stone gives the count. At 0.011 ct, the middle of the 1.30–1.40 mm band, 1 ÷ 0.011 is about 90 stones.
- The chart lists common bands, not every band. There are sizes between these rows. If you need one, ask for it in millimetres.
- There is no sieve-code column, on purpose. Each supplier's codes map to these sizes differently. Ask your supplier for their code against each millimetre band, in writing, before the first order.
The count is the easiest check you have. Weigh out one carat from a parcel described as 1.30–1.40 mm and count the stones. If you find about 90, the size is right. If you find 110, the goods are smaller than ordered.
Is sieve size a quality grade?
No. Sieving is size classification and nothing else. A plate of +A −B stones can hold any colour and any clarity, well made or badly made.
Colour, clarity and make are sorted separately. A melee parcel is described by all of them together: the size band, a colour range, a clarity range, and for lab-grown goods the growth method. Our guide to what is in a 100-carat melee parcel covers how those ranges work, and India cut melee covers what to check in the make. For what we list and how to order, see our melee and round brilliant pages.
Do not read a sieve code as a promise of quality. Two parcels of the same sieve size can differ sharply in price because everything else about them differs.
How should you state a sieve size in an order?
- Name the shape and cut. Write “Round brilliant”. The mm-to-carat figures only hold for rounds.
- Give the diameter as a millimetre interval. For example “1.30–1.40 mm”. This is the specification the goods are checked against.
- Add the sieve code as a reference only. Write the supplier’s code next to the mm, and say whose numbering it is. If the two ever disagree, the millimetres decide.
- State the expected weight or count. For 1.30–1.40 mm, write “approx. 0.010–0.012 ct per stone, about 90 per carat”. It gives both sides a quick check on arrival.
- Agree a tolerance in writing. State what share of the parcel may fall outside the interval, and whether it is counted by stones or by weight.
- Check the first order against a sample. With a new supplier, ask for a small sample from the actual parcel, or for the apertures of the plates they sieve with, before the full parcel ships.
A complete size line then reads like this:
Round brilliant, 1.30–1.40 mm, approx. 0.010–0.012 ct per stone (about 90 per carat). Supplier’s sieve code, and whose numbering it is, given for reference only: the millimetres decide. Tolerance: as agreed in writing, counted by stones.
The other fields of an order, colour, clarity, make, quantity and price basis, are covered in how to specify a loose diamond order.
How do you check sizes when a parcel arrives?
Check before you set anything.
- Count per carat. Weigh out one carat and count the stones. Compare with the chart above.
- Measure a sample. Take a random sample of stones and measure each girdle with a millimetre gauge. Note how many fall outside the agreed interval.
- Re-sieve if you have the plates. Run the parcel through plates of the stated apertures. Stones left on the wrong plate are out of size.
Record what you find before you contact the supplier. A complaint that says “14 of 100 sampled stones measured under 1.30 mm” is resolved quickly. A complaint that says “they look small” is not.
You can see how sizes and per-carat prices are laid out for current goods on our price list.
Frequently asked questions
What does a sieve size written with a plus and a minus mean?
The stones stayed on the plate with the plus number and fell through the plate with the minus number. Their girdle diameter lies between those two apertures.
Are sieve sizes the same at every supplier?
No. Sieve numbering is not standardised, and suppliers and regions use different code systems. Always confirm the millimetre interval behind a code.
How many stones are in one carat of 1.30–1.40 mm melee?
About 90. Each round brilliant in that band weighs roughly 0.010–0.012 ct.
Does a sieve size tell you anything about quality?
No. Sieving sorts by diameter only. Colour, clarity and make are specified separately.
Should I order melee by sieve code or by millimetres?
By millimetres. Put the sieve code next to it as a reference, and agree that the millimetres decide if the two disagree.
Does the mm-to-carat chart apply to fancy shapes?
No. It is for round brilliants. For fancy shapes, specify length and width in millimetres.