Why is melee sold in parcels rather than as single stones?

Because there are too many stones to handle one at a time. Melee are the small diamonds used in pavé, halos, eternity bands and accents. A single piece of jewellery can hold dozens or hundreds of them. Grading and pricing each one separately would cost more than the stones are worth.

So the trade sorts melee into groups that are alike enough to set together, and sells each group by weight. Surat is a major centre for this work: melee is faceted, sorted and sold there in parcels of 100 carats or more to jewellery manufacturers.

What you buy is a specification and a weight. Every stone in the parcel should fit the specification. None of them is described on its own.

What does a parcel specification include?

Five things, and each one should be in writing:

  • Size. A band of girdle diameters, best stated in millimetres, such as 1.30–1.40 mm. A sieve code can sit next to it as a reference, but codes are not standardised between suppliers. Our sieve size chart explains why.
  • Colour range. For example G–H.
  • Clarity range. For example VS–SI.
  • Shape and make. Most melee is round. Full cut and single cut are different makes and are priced differently. Say which you want.
  • Growth method, for lab-grown parcels: CVD or HPHT.

Then the quantity, in carats, and whether the price is per carat. For a complete order line, see our guide to specifying a loose diamond order.

How many stones are in a 100-carat parcel?

Multiply the parcel weight by the number of stones per carat for that size. For round brilliant melee:

Diameter (mm)Weight per stone (ct)Stones per caratStones in 100 ct
1.00–1.100.005–0.006about 180about 18,000
1.20–1.300.008–0.010about 110about 11,000
1.30–1.400.010–0.012about 90about 9,000
1.50–1.600.015–0.018about 62about 6,200
1.90–2.000.029–0.033about 32about 3,200
2.40–2.600.052–0.065about 17about 1,700
2.80–3.000.080–0.100about 11about 1,100

The working is the same on every row. Take 1.30–1.40 mm: each stone weighs 0.010–0.012 ct, so one carat holds about 90 stones, and 100 carats hold about 100 × 90 = 9,000.

The counts are approximate for two reasons. First, the weight of a stone at a given diameter depends on its proportions; a deeper stone weighs more. Second, a parcel spans a whole band, and the mix of stones near the top and bottom of the band moves the count. Treat the figure as a check, not a promise: a parcel of 1.30–1.40 mm that counts 110 stones to the carat is smaller than ordered.

Why are colour and clarity given as ranges?

Because a parcel is sorted, not graded stone by stone. Sorting puts each stone into a group whose limits are known. Inside those limits, the stones vary.

A parcel described as G–H holds stones that sorted as G and stones that sorted as H. A parcel described as VS–SI holds a spread of both. You pay one price per carat for the whole spread.

Two things follow:

  • Judge the parcel at its low end. The weakest stones in the range are the ones that set the look of the finished piece. Sample enough stones to see them.
  • Narrow ranges cost more. A single-grade parcel, such as G only or VS1 only, takes more sorting and costs more per carat. Order a narrow range only where the design needs it.

What does "assorted" mean, and when should you avoid it?

"Assorted" means mixed. An assorted parcel holds stones across more than one size band, more than one quality range, or both. It is cheaper per carat because less sorting has been done.

Sorted parcelAssorted parcel
SizeOne band, such as 1.30–1.40 mmSeveral bands mixed
Colour and clarityStated rangesWide or unstated
Price per caratHigherLower
Ready to setYes, for one setting sizeNo, needs sorting first
Good forProduction with fixed settingsBuyers who sort for themselves

Assorted goods suit a buyer who has the people and tools to sort them and can use every size band. They do not suit a manufacturer who needs thousands of stones of one size for one setting: the sorting cost, and the stones that fit nothing, can wipe out the saving.

If you do buy assorted, get the size spread and quality range in writing anyway. "Assorted" with nothing else stated gives you nothing to claim against.

How do you inspect a melee parcel on arrival?

  1. Weigh the parcel. Check the total weight against the invoice before you open anything else.
  2. Count stones per carat. Weigh out one carat and count the stones. Compare the count with the stones-per-carat figure for the ordered size band.
  3. Measure a random sample. Take stones from different parts of the parcel and measure each girdle with a millimetre gauge, or re-sieve with plates of the stated apertures. Note how many fall outside the band.
  4. Check colour against the range. Compare a sample with master stones at the low end of the stated colour range, under the same light.
  5. Check clarity and make. Look at a sample under a loupe. Check outlines, table size and finish, and full cut or single cut as ordered.
  6. Write it down before you call. Record weights, counts and measurements, and keep the stones in their original parcel paper.

What can you do if a parcel is off-spec?

Start with what you recorded. A claim that says "out of 200 sampled stones, 31 measured under 1.30 mm" is specific, and a supplier can check it. A claim that says "the stones look small" starts an argument.

Then go back to what was agreed in writing before the order:

  • The tolerance. Most disputes turn on how many stones outside the specification are acceptable, and whether that is counted by stones or by weight. If no tolerance was agreed, every stone outside the band is a point of argument.
  • The remedy. Return of the out-of-spec stones, exchange, a price adjustment, or return of the whole parcel. Agree which applies, and the deadline for raising a claim, before you buy.
  • Condition on return. Returned goods must come back as they were sent. Keep the parcel paper and do not mix stones from different parcels while you check them.

If the parcel was on memo rather than bought outright, the memo terms govern returns. Our guide to how memo works covers that.

For round melee in stock now, see our melee page and the price list.

Frequently asked questions

How many stones are in a 100-carat melee parcel?

It depends on the size. At 1.30–1.40 mm, about 9,000 stones; at 2.80–3.00 mm, about 1,100. Multiply 100 by the stones per carat for the size band.

Why does a melee parcel have a colour range instead of one colour?

Because the stones are sorted into groups, not graded one by one. Every stone falls inside the range, so judge the parcel at the low end.

What is an assorted melee parcel?

A parcel that mixes size bands, quality ranges or both. It costs less per carat but must be sorted before setting.

How do I check the size of a melee parcel quickly?

Weigh out one carat and count the stones. The count tells you at once whether the size band matches the order.

What should I agree before buying a melee parcel?

The size in millimetres, colour and clarity ranges, make, quantity, price basis, the tolerance for out-of-spec stones, and the remedy if a parcel is off-spec.