Which fields should every order state?

Nine fields cover almost every loose diamond order. Leave none of them to the supplier's judgement.

FieldHow to write itExample
ShapeThe shape and cut nameRound brilliant
SizeCarat range for single stones; millimetre interval for small stones0.50–0.59 ct, or 1.30–1.40 mm
ColourA grade or a rangeG–H
ClarityA grade or a rangeVS1–VS2
MakeCut grade for rounds; proportions, polish and symmetry otherwise; full or single cut for meleeCut Excellent, polish and symmetry Very Good or better
OriginNatural, or lab-grown with the growth methodLab-grown CVD
QuantityCarats or pieces, and which20 pieces, or 50 ct
Price basisPer carat or per piecePer carat
ReportLaboratory, and which stones need oneReport for every stone over 0.50 ct

Add anything the goods must match: a setting size, an existing stone, a sample you sent. If it matters to you, write it down. Each shape has its own points to add: the bow-tie and ratio for an oval, the cut grade for a round brilliant, the growth method and treatment for lab-grown CVD.

What causes disputes, and how does precise wording prevent each one?

Most disputes come from a gap in the order that both sides filled differently.

Cause of disputeWhat happenedWording that prevents it
Size by sieve code onlyBuyer's chart and supplier's chart map the code to different sizes (see our sieve size chart)"1.30–1.40 mm; supplier's sieve code for reference only"
Colour or clarity range read differentlyBuyer expected the top of the range, received the bottomState the range and judge acceptance at its low end
Make not statedStones within grade but poorly cut, deep or with thick girdlesState cut grade, or proportions, polish and symmetry
Natural and lab-grown mixedLab-grown stones found in a natural parcel"Natural only; parcel screened"
Treatment not statedStones treated after growth, or clarity-enhanced"Untreated" or "as grown", or state what is acceptable
Per carat or per piece unclearInvoice total far from what the buyer expected"Price per carat" written on the order and the invoice
Quantity unit unclear50 ordered, meaning carats; 50 pieces delivered"50 ct" or "50 pieces", never just "50"
No tolerance agreedArgument over how many out-of-spec stones are acceptableA tolerance, how it is counted, and the remedy
Report not specifiedStones arrive without reports, or from a different laboratoryName the laboratory and which stones need reports

None of these needs legal language. Each needs one clear line on the order.

Why must per carat or per piece be stated explicitly?

Because the two prices are not close, and the difference grows as stones get smaller.

A price per carat is multiplied by the total weight. A price per piece is multiplied by the number of stones. For a single 1 ct stone, the two numbers happen to match. For melee they are far apart: a carat of 1.30–1.40 mm melee holds about 90 stones. Read a per-piece price as per carat, or the other way round, and the total is out by a factor of about 90.

Write the basis on the order, and check it on the quotation and the invoice. Most price lists for loose diamonds quote per carat; our price list states it in the price column.

How should you state tolerances?

A tolerance says how much of the delivery may fall outside the specification without a claim. Without one, every out-of-spec stone is an argument. With one, the parcel either passes or it does not.

A useful tolerance answers four questions:

  1. What is measured? Size, colour, clarity, or each separately.
  2. How is it counted? By number of stones or by weight. For melee, counting stones from a sample is usual and easy to repeat.
  3. How is it checked? Which tool, which sample size, and against which master stones for colour.
  4. What happens if it fails? Return of the out-of-spec stones, exchange, a price adjustment, or return of the whole parcel, and by when a claim must be raised.

Agree the figure with your supplier before the first order. It is far easier to agree a tolerance than to argue about a parcel without one.

What should a certification requirement say?

Name the laboratory. Say which stones need a report: every stone, or every stone above a stated weight. For lab-grown stones, ask how the report describes post-growth treatment, and say whether treated stones are acceptable. For any stone with a report, check that the report matches the stone: weight, measurements and, where there is one, the laser inscription on the girdle.

Melee is rarely sold with individual reports. For parcels, the specification and your own checks do the work. Our guide to melee parcels covers how to check one.

How do you write a loose diamond order, step by step?

  1. List one item per line. Give each distinct specification its own line, even when the shape is the same.
  2. State shape, size, colour and clarity. Use a carat range for single stones and a millimetre interval for small stones; give colour and clarity as grades or ranges.
  3. State the make. Cut grade for rounds; proportions, polish and symmetry for other shapes; full or single cut for melee.
  4. State natural or lab-grown. For lab-grown, give the growth method and whether stones treated after growth are acceptable. For natural parcels, ask for screening.
  5. State quantity and price basis. Write "ct" or "pieces" after every quantity, and "per carat" or "per piece" for every price.
  6. Name the report, if any. Give the laboratory and which stones need a report.
  7. Agree the tolerance and the remedy. Say how many out-of-spec stones are acceptable, how they are counted, what happens to them, and the deadline for a claim.

What does a well-written order look like?

Copy this and change the values. Each line is one item; each item states every field.

  • Order from: [your company], [contact name], [country]
  • Date: [date]
  • Price basis: USD per carat, unless stated otherwise on the line
  1. Round brilliant, natural, 0.50–0.59 ct, G–H, VS1–VS2, cut Excellent, polish and symmetry Very Good or better, fluorescence None to Faint, 20 pieces, report for each stone from [laboratory].
  2. Round brilliant melee, natural, full cut, 1.30–1.40 mm (about 90 stones per carat; supplier's sieve code for reference only, the millimetres decide), G–H, VS–SI, screened for lab-grown, 50 ct.
  3. Oval, lab-grown CVD, as grown (no post-growth treatment), 1.00–1.09 ct, E–F, VS1–VS2, light or no bow-tie, polish and symmetry Very Good or better, 4 pieces, report for each stone from [laboratory].

Tolerance (line 2): [agreed share] of stones outside 1.30–1.40 mm, counted by stones from a sample of [agreed size]. Out-of-spec stones returned for credit; claims within [agreed days] of receipt.

Send it as text, not as a photo of handwriting. Ask the supplier to quote line by line against it, so the quotation repeats every field. If the goods are to come on consignment rather than outright, the same description belongs on the memo; see how memo works.

You can send an order like this through our quotation form, which asks for each field in turn.

Frequently asked questions

What must a loose diamond order include?

Shape, size, colour, clarity, make, natural or lab-grown with growth method, quantity in carats or pieces, price basis, and any report needed.

Should I order melee by sieve size or millimetres?

By millimetres. Sieve codes are not standardised between suppliers, so give the code only as a reference.

What is the difference between per carat and per piece pricing?

Per carat is multiplied by total weight; per piece by the number of stones. For melee the two differ many times over, so always state which.

What is a tolerance in a diamond order?

The share of stones that may fall outside the specification without a claim, how it is counted, and what happens to stones that fail.

Do melee parcels come with grading reports?

Rarely. Parcels are bought on their specification and checked on arrival by counting, measuring and sampling.